4" 3000 psi Hot Medium Manometer All Stainless Steel Pressure Gauge
with Radiating Pipe
Description
Pressure gages should be provided on the suction and discharge of a
firewater pump. A suction pressure gage is not required for
vertical shaft, turbine type pumps taking suction from a well, open
wet pit or offshore facility (as the gage itself would be in the
submerged liquid). These gages provide assistance to verify the
normal pump function during daily operations and to assist in the
conduction of periodic flow performance verification tests. They
should be placed or fitted where they are easily readable during
operation of the pump by the personnel that attend the operation of
the system and give an accurate reading of the performance of the
pumping system. Additionally, a pressure transducer can supplement
the gages to provide direct readout of pump pressures in the
control room or through the distributed control system (DCS) or
other utility monitoring system.
Applications
For aggressive gaseous and liquid media that are not highly
crystallising, also operates in aggressive environments
Oil and gas industry, chemical and petrochemical industry, pumbling
and HVAC, hydraulics and pneumatics
Machine building and general plant construction
Special features
Excellent load cycle stability and shock resistance
Design per EN 837-1
Completely from stainless steel
Scale ranges up to 0 ... 1600 bar
Specifications
Design | EN 837-1 |
Nominal size | 100mm |
Accuracy | 1.6, 1.0, 2.5 |
| Pressure range | 200 bar (customized) |
Pressure limitation | Steady: 3/4 x full scale value
Fluctuating: 2/3 x full scale value
Fluctuating: 2/3 x full scale value |
| Medium temperature | Unfilled gauge: -40 ... +200 °C [-40 ... +392 °F] Gauge with glycerine filling: -20 ... +100 °C [-4 ... +212 °F] Gauge with silicone oil filling: -40 ... +100 °C [-40 ... +212 °F] |
Ambiet temperature | Unfilled gauge: -40 ... +60 °C [-40 ... +140 °F] Gauge with glycerine filling: -20 ... +60 °C [-40 ... +140 °F] Gauge with silicone oil filling: -40 ... +60 °C [-40 ... +140 °F] |
Temperature effect | When the temperature of the measuring system deviates from the
reference temperature (+20 °C): max. ±0.4 %/10 K of the span |
Process connection | Stainless steel, SUS 304, SUS 316 |
Pressure element | Stainless steel, C-type or helical type |
| Movement | Stainless steel |
| Dial | Aluminium, colorful, without pointer stop pin
Black lettering |
| Pointer | Aluminium |
| Case | Stainless steel |
| Ring | Bayonet ring, stainless steel |
| Window | Plastic, glass |
| Unit | bar, psi, kg/cm2, kPa, MPa |
| Thread | G, BSP, PT, BSPT, NPT |
| Options | Other process connection
Surface mounting flange
Mounting bracket |
Dimensions
Model M03.01, lower mount (radial)
Ordering information
Model / Dial size / Pressure Range / Process connection / Options
